Datoteka:Hexahedron.jpg

Veličina ovog prikaza: 538 × 599 piksela. Druge rezolucije: 216 × 240 piksela | 431 × 480 piksela | 742 × 826 piksela.

Izvorna datoteka ‎(742 × 826 piksela, veličina datoteke/fajla: 51 kB, MIME tip: image/jpeg)

Ova datoteka je s projekta Vikimedijina ostava i može se upotrebljavati i na drugim projektima. Ispod su prikazane informacije s njene opisne stranice.

Opis izmjene

OpisHexahedron.jpg	English: A Hexahedron (cube). A regular polyhedron.
Izvor	see below
Autor	Izvorno postavio Cyp na Wikipedia na Engleski

Dostupna je vektorska inačica (SVG) ove slike. Trebala bi se koristiti umjesto ove rasterske slike ako je kvalitetnija.

File:Hexahedron.jpg → File:Hexahedron.svg

Za više informacija o vektorskoj grafici, pročitajte o prelasku Zajedničkog poslužitelja na SVG.
Također pročitajte informacije o podršci MediaWiki softvera slikama u SVG formatu.

Na drugim jezicima

Alemannisch ∙ Bahasa Indonesia ∙ Bahasa Melayu ∙ British English ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ eesti ∙ English ∙ español ∙ Esperanto ∙ euskara ∙ français ∙ Frysk ∙ galego ∙ hrvatski ∙ Ido ∙ italiano ∙ lietuvių ∙ magyar ∙ Nederlands ∙ norsk bokmål ∙ norsk nynorsk ∙ occitan ∙ Plattdüütsch ∙ polski ∙ português ∙ português do Brasil ∙ română ∙ Scots ∙ sicilianu ∙ slovenčina ∙ slovenščina ∙ suomi ∙ svenska ∙ Tiếng Việt ∙ Türkçe ∙ vèneto ∙ Ελληνικά ∙ беларуская (тарашкевіца) ∙ български ∙ македонски ∙ нохчийн ∙ русский ∙ српски / srpski ∙ татарча/tatarça ∙ українська ∙ ქართული ∙ հայերեն ∙ বাংলা ∙ தமிழ் ∙ മലയാളം ∙ ไทย ∙ 한국어 ∙ 日本語 ∙ 简体中文 ∙ 繁體中文 ∙ עברית ∙ العربية ∙ فارسی ∙ +/−

Licenciranje

Dopušteno je umnožavanje, dijeljenje i mijenjanje ovog dokumenta pod uslovima GNU-ove licence za slobodnu dokumentaciju, verzije 1.2 ili bilo koje novije koju objavi Fondacija za slobodni softver; bez nepromjenljivih odjeljaka i bez tekstova na naslovnoj i zadnjoj strani. Tekst licence možete pročitati ovdje.

	Ova datoteka dostupna je pod licencom Creative Commons Attribution-Share Alike 3.0 Unported licencom.

	Slobodno smijete: dijeliti – umnožavati, raspodjeljivati i prenositi djelo prerađivati – prilagođavati djelo Pod sljedećim uslovima: pripisivanje – Morate pripisati odgovarajuće autorske zasluge, osigurati link ka licenci i naznačiti jesu li napravljene izmjene. To možete uraditi na bilo koji razumni način, ali ne tako da se sugerira da davalac licence odobrava Vas ili Vašu upotrebu njegovog djela. dijeljenje pod istim uslovima – Ako mijenjate, transformišete ili nadograđujete ovaj materijal, morate ga objaviti i distribuirati samo pod istom ili sličnom licencom poput ove.
	Ova oznaka licence je dodana na ovu datoteku kao dio GFDL ažuriranja licence.CC BY-SA 3.0truetrue

Povray src code

Hexahedron, made by me using POV-Ray, see en:User:Cyp/Poly.pov for source.}}

//Picture   ***  Use flashiness=1 !!! ***
//
//   +w1024 +h1024 +a0.3 +am2
//   +w512 +h512 +a0.3 +am2
//
//Movie   ***  Use flashiness=0.25 !!! ***
//
//   +kc +kff120 +w256 +h256 +a0.3 +am2
//   +kc +kff60 +w256 +h256 +a0.3 +am2
//"Fast" preview
//   +w128 +h128
#declare notwireframe=1;
#declare withreflection=0;
#declare flashiness=0.25; //Still pictures use 1, animated should probably be about 0.25.

#macro This_shape_will_be_drawn()
   //PLATONIC SOLIDS ***********
  //tetrahedron() #declare rotation=seed(1889/*1894*/);
  //hexahedron() #declare rotation=seed(7122);
  //octahedron() #declare rotation=seed(4193);
  //dodecahedron() #declare rotation=seed(4412);
  //icosahedron() #declare rotation=seed(7719);


  //weirdahedron() #declare rotation=seed(7412);


   //ARCHIMEDIAN SOLIDS ***********
  //cuboctahedron() #declare rotation=seed(1941);
  //icosidodecahedron() #declare rotation=seed(2241);

  //truncatedtetrahedron() #declare rotation=seed(8717);
  //truncatedhexahedron() #declare rotation=seed(1345);
  //truncatedoctahedron() #declare rotation=seed(7235);
  //truncateddodecahedron() #declare rotation=seed(9374);
  //truncatedicosahedron() #declare rotation=seed(1666);

  //rhombicuboctahedron() #declare rotation=seed(6124);
  //truncatedcuboctahedron() #declare rotation=seed(1156);
  //rhombicosidodecahedron() #declare rotation=seed(8266);
  //truncatedicosidodecahedron() #declare rotation=seed(1422);

  //snubhexahedron(-1) #declare rotation=seed(7152);
  //snubhexahedron(1) #declare rotation=seed(1477);
  //snubdodecahedron(-1) #declare rotation=seed(5111);
  //snubdodecahedron(1) #declare rotation=seed(8154);


   //CATALAN SOLIDS ***********
  //rhombicdodecahedron() #declare rotation=seed(7154);
  //rhombictriacontahedron() #declare rotation=seed(1237);

  //triakistetrahedron() #declare rotation=seed(7735);
  //triakisoctahedron() #declare rotation=seed(5354);
  //tetrakishexahedron() #declare rotation=seed(1788);
  //triakisicosahedron() #declare rotation=seed(1044);
  //pentakisdodecahedron() #declare rotation=seed(6100);

  //deltoidalicositetrahedron() #declare rotation=seed(5643);
  //disdyakisdodecahedron() #declare rotation=seed(1440);
  //deltoidalhexecontahedron() #declare rotation=seed(1026);
  //disdyakistriacontahedron() #declare rotation=seed(1556);

  //pentagonalicositetrahedron(-1) #declare rotation=seed(7771);
  //pentagonalicositetrahedron(1) #declare rotation=seed(3470);
  //pentagonalhexecontahedron(-1) #declare rotation=seed(1046);
  //pentagonalhexecontahedron(1) #declare rotation=seed(1096);

   //PRISMS, ANTIPRISMS, ETC... ***********
  //rprism(5) #declare rotation=seed(6620);
  antiprism(5) #declare rotation=seed(6620);
  //bipyramid(5) #declare rotation=seed(6620);
  //trapezohedron(17) #declare rotation=seed(6620);

#end


#declare tau=(1+sqrt(5))/2;
#declare sq2=sqrt(2);
#declare sq297=sqrt(297);
#declare xi=(pow(sq297+17,1/3)-pow(sq297-17,1/3)-1)/3;
#declare sqweird=sqrt(tau-5/27);
#declare ouch=pow((tau+sqweird)/2,1/3)+pow((tau-sqweird)/2,1/3);
#declare alfa=ouch-1/ouch;
#declare veta=(ouch+tau+1/ouch)*tau;

#macro tetrahedron()
  addpointsevensgn(<1,1,1>)
  autoface()
#end

#macro hexahedron()
  addpointssgn(<1,1,1>,<1,1,1>)
  autoface()
#end

#macro octahedron()
  addevenpermssgn(<1,0,0>,<1,0,0>)
  autoface()
#end

#macro dodecahedron()
  addpointssgn(<1,1,1>,<1,1,1>)
  addevenpermssgn(<0,1/tau,tau>,<0,1,1>)
  autoface()
#end

#macro icosahedron()
  addevenpermssgn(<0,1,tau>,<0,1,1>)
  autoface()
#end


#macro weirdahedron()
  addpermssgn(<1,2,3>,<1,1,1>)
  autoface()
#end


#macro cuboctahedron()
  addevenpermssgn(<0,1,1>,<0,1,1>)
  autoface()
#end

#macro icosidodecahedron()
  addevenpermssgn(<0,0,2*tau>,<0,0,1>)
  addevenpermssgn(<1,tau,1+tau>,<1,1,1>)
  autoface()
#end


#macro truncatedtetrahedron()
  addevenpermsevensgn(<1,1,3>)
  autoface()
#end

#macro truncatedhexahedron()
  addevenpermssgn(<sq2-1,1,1>,<1,1,1>)
  autoface()
#end

#macro truncatedoctahedron()
  addpermssgn(<0,1,2>,<0,1,1>)
  autoface()
#end

#macro truncateddodecahedron()
  addevenpermssgn(<0,1/tau,2+tau>,<0,1,1>)
  addevenpermssgn(<1/tau,tau,2*tau>,<1,1,1>)
  addevenpermssgn(<tau,2,1+tau>,<1,1,1>)
  autoface()
#end

#macro truncatedicosahedron()
  addevenpermssgn(<0,1,3*tau>,<0,1,1>)
  addevenpermssgn(<2,1+2*tau,tau>,<1,1,1>)
  addevenpermssgn(<1,2+tau,2*tau>,<1,1,1>)
  autoface()
#end


#macro rhombicuboctahedron()
  addevenpermssgn(<1+sq2,1,1>,<1,1,1>)
  autoface()
#end

#macro truncatedcuboctahedron()
  addpermssgn(<1,1+sq2,1+sq2*2>,<1,1,1>)
  autoface()
#end

#macro rhombicosidodecahedron()
  addevenpermssgn(<1,1,1+2*tau>,<1,1,1>)
  addevenpermssgn(<tau,2*tau,1+tau>,<1,1,1>)
  addevenpermssgn(<2+tau,0,1+tau>,<1,0,1>)
  autoface()
#end

#macro truncatedicosidodecahedron()
  addevenpermssgn(<1/tau,1/tau,3+tau>,<1,1,1>)
  addevenpermssgn(<2/tau,tau,1+2*tau>,<1,1,1>)
  addevenpermssgn(<1/tau,1+tau,3*tau-1>,<1,1,1>)
  addevenpermssgn(<2*tau-1,2,2+tau>,<1,1,1>)
  addevenpermssgn(<tau,3,2*tau>,<1,1,1>)
  autoface()
#end


#macro snubhexahedron(s)
  addpermsaltsgn(<1,1/xi,xi>*s)
  autoface()
#end

#macro snubdodecahedron(s)
  addevenpermsevensgn(<2*alfa,2,2*veta>*s)
  addevenpermsevensgn(<alfa+veta/tau+tau,-alfa*tau+veta+1/tau,alfa/tau+veta*tau-1>*s)
  addevenpermsevensgn(<-alfa/tau+veta*tau+1,-alfa+veta/tau-tau,alfa*tau+veta-1/tau>*s)
  addevenpermsevensgn(<-alfa/tau+veta*tau-1,alfa-veta/tau-tau,alfa*tau+veta+1/tau>*s)
  addevenpermsevensgn(<alfa+veta/tau-tau,alfa*tau-veta+1/tau,alfa/tau+veta*tau+1>*s)
  autoface()
#end

#macro rhombicdodecahedron()
  cuboctahedron() dual()
#end

#macro rhombictriacontahedron()
  icosidodecahedron() dual()
#end

#macro triakistetrahedron()
  truncatedtetrahedron() dual()
#end

#macro triakisoctahedron()
  truncatedhexahedron() dual()
#end

#macro tetrakishexahedron()
  truncatedoctahedron() dual()
#end

#macro triakisicosahedron()
  truncateddodecahedron() dual()
#end

#macro pentakisdodecahedron()
  truncatedicosahedron() dual()
#end

#macro deltoidalicositetrahedron()
  rhombicuboctahedron() dual()
#end

#macro disdyakisdodecahedron()
  truncatedcuboctahedron() dual()
#end

#macro deltoidalhexecontahedron()
  rhombicosidodecahedron() dual()
#end

#macro disdyakistriacontahedron()
  truncatedicosidodecahedron() dual()
#end

#macro pentagonalicositetrahedron(s)
  snubhexahedron(s) dual()
#end

#macro pentagonalhexecontahedron(s)
  snubdodecahedron(s) dual()
#end

#macro rprism(n)
  #local a=sqrt((1-cos(2*pi/n))/2);
  #local b=0; #while(b<n-.5)
    addpointssgn(<sin(2*pi*b/n),cos(2*pi*b/n),a>,<0,0,1>)
  #local b=b+1; #end
  autoface()
#end

#macro antiprism(n)
  #local a=sqrt((cos(pi/n)-cos(2*pi/n))/2);
  #local b=0; #while(b<2*n-.5)
    addpoint(<sin(pi*b/n),cos(pi*b/n),a>)
  #local a=-a; #local b=b+1; #end
  autoface()
#end

#macro bipyramid(n)
  rprism(n) dual()
#end

#macro trapezohedron(n)
  antiprism(n) dual()
#end


#declare points=array[1000];
#declare npoints=0;
#declare faces=array[1000];
#declare nfaces=0;
#macro addpoint(a)
  #declare points[npoints]=a;
  #declare npoints=npoints+1;
#end
#macro addevenperms(a)
  addpoint(a)
  addpoint(<a.y,a.z,a.x>)
  addpoint(<a.z,a.x,a.y>)
#end
#macro addperms(a)
  addevenperms(a)
  addevenperms(<a.x,a.z,a.y>)
#end
#macro addpointssgn(a,s)
  addpoint(a)
  #if(s.x) addpointssgn(a*<-1,1,1>,s*<0,1,1>) #end
  #if(s.y) addpointssgn(a*<1,-1,1>,s*<0,0,1>) #end
  #if(s.z) addpoint(a*<1,1,-1>) #end
#end
#macro addevenpermssgn(a,s)
  addpointssgn(a,s)
  addpointssgn(<a.y,a.z,a.x>,<s.y,s.z,s.x>)
  addpointssgn(<a.z,a.x,a.y>,<s.z,s.x,s.y>)
#end
#macro addpermssgn(a,s)
  addevenpermssgn(a,s)
  addevenpermssgn(<a.x,a.z,a.y>,<s.x,s.z,s.y>)
#end
#macro addpointsevensgn(a)
  addpoint(a)
  addpoint(a*<-1,-1,1>)
  addpoint(a*<-1,1,-1>)
  addpoint(a*<1,-1,-1>)
#end
#macro addevenpermsevensgn(a)
  addevenperms(a)
  addevenperms(a*<-1,-1,1>)
  addevenperms(a*<-1,1,-1>)
  addevenperms(a*<1,-1,-1>)
#end
#macro addpermsaltsgn(a)
  addevenpermsevensgn(a)
  addevenpermsevensgn(<a.x,a.z,-a.y>)
#end
/*#macro addevenpermssgn(a,s) //Calls addevenperms with, for each 1 in s, a.{x,y,z} replaced with {+,-}a.{x,y,z}
  addevenperms(a)
  #if(s.x) addevenpermssgn(a*<-1,1,1>,s*<0,1,1>) #end
  #if(s.y) addevenpermssgn(a*<1,-1,1>,s*<0,0,1>) #end
  #if(s.z) addevenperms(a*<1,1,-1>) #end
#end*/
#macro addface(d,l)
  #local a=vnormalize(d)/l; 
  #local f=1;
  #local n=0; #while(n<nfaces-.5)
    #if(vlength(faces[n]-a)<0.00001) #local f=0; #end
  #local n=n+1; #end
  #if(f)
    #declare faces[nfaces]=a;
    #declare nfaces=nfaces+1;
  #end
#end
#macro dual()
  #declare temp=faces;
  #declare faces=points;
  #declare points=temp; 
  #declare temp=nfaces;
  #declare nfaces=npoints;
  #declare npoints=temp; 
#end

#macro autoface() //WARNING: ONLY WORKS IF ALL EDGES HAVE EQUAL LENGTH
  //Find edge length 
  #declare elength=1000;
  #local a=0; #while(a<npoints-.5) #local b=0; #while(b<npoints-.5)
    #local c=vlength(points[a]-points[b]); #if(c>0.00001 & c<elength) #local elength=c; #end
  #local b=b+1; #end #local a=a+1; #end

  //Find planes
  //#macro planes()
  #local a=0; #while(a<npoints-.5)
    #local b=a+1; #while(b<npoints-.5)
      #if(vlength(points[a]-points[b])<elength+0.00001) #local c=b+1; #while(c<npoints-.5)
        #if(vlength(points[a]-points[c])<elength+0.00001)
          #local n=vnormalize(vcross(points[b]-points[a],points[c]-points[a]));
          #local d=vdot(n,points[a]);
          #if(d<0) #local n=-n; #local d=-d; #end
          #local f=1;
          #local e=0; #while(e<npoints-.5)
            #if(vdot(n, points[e])>d+0.00001) #local f=0; #end
          #local e=e+1; #end
          #if(f)
            #declare ld=d;
            addface(n,d) //plane { n, d }
          #end
        #end
      #local c=c+1; #end #end
    #local b=b+1; #end
  #local a=a+1; #end
#end

This_shape_will_be_drawn()

//Random rotations are (hopefully) equally distributed...
#declare rot1=rand(rotation)*pi*2;
#declare rot2=acos(1-2*rand(rotation));
#declare rot3=(rand(rotation)+clock)*pi*2;
#macro dorot()
  rotate rot1*180/pi*y
  rotate rot2*180/pi*x
  rotate rot3*180/pi*y
#end

//Scale shape to fit in unit sphere
#local b=0;
#local a=0; #while(a<npoints-.5)
  #local c=vlength(points[a]); #if(c>b) #local b=c; #end
#local a=a+1; #end
#local a=0; #while(a<npoints-.5)
  #local points[a]=points[a]/b;
#local a=a+1; #end
#local a=0; #while(a<nfaces-.5)
  #local faces[a]=faces[a]*b;
#local a=a+1; #end

//Draw edges
#macro addp(a)
  #declare p[np]=a;
  #declare np=np+1;
#end
#local a=0; #while(a<nfaces-.5)
  #declare p=array[20];
  #declare np=0;
  #local b=0; #while(b<npoints-.5)
    #if(vdot(faces[a],points[b])>1-0.00001) addp(b) #end
  #local b=b+1; #end
  #local c=0; #while(c<np-.5)
    #local d=0; #while(d<np-.5) #if(p[c]<p[d]-.5)
      #local f=1;
      #local e=0; #while(e<np-.5) #if(e!=c & e!=d & vdot(vcross(points[p[c]],points[p[d]]),points[p[e]])<0)
        #local f=0;
      #end #local e=e+1; #end
      #if(f)
        object {
          cylinder { points[p[c]], points[p[d]], .01 dorot() }
          pigment { colour <.3,.3,.3> }
          finish { ambient 0 diffuse 1 phong 1 }
        }
      #end #end        
    #local d=d+1; #end
  #local c=c+1; #end
#local a=a+1; #end
/*#local a=0; #while(a<npoints-.5)
  #local b=a+1; #while(b<npoints-.5)
    #if(vlength(points[a]-points[b])<elength+0.00001)
      object {
        cylinder { points[a], points[b], .01 dorot() }
        pigment { colour <.3,.3,.3> }
        finish { ambient 0 diffuse 1 phong 1 }
      }
    #end
  #local b=b+1; #end
#local a=a+1; #end*/

//Draw points
#local a=0; #while(a<npoints-.5)
  object {
    sphere { points[a], .01 dorot() }
    pigment { colour <.3,.3,.3> }
    finish { ambient 0 diffuse 1 phong 1 }
  }
#local a=a+1; #end

#if(notwireframe)
//Draw planes
object {
  intersection {
    #local a=0; #while(a<nfaces-.5)
      plane { faces[a], 1/vlength(faces[a]) }
    #local a=a+1; #end
    //planes()
    //sphere { <0,0,0>, 1 }
    //sphere { <0,0,0>, ld+.01 inverse }
    dorot()
  }
  pigment { colour rgbt <.8,.8,.8,.4> }
  finish { ambient 0 diffuse 1 phong flashiness #if(withreflection) reflection { .2 } #end }
  //interior { ior 1.5 }
  photons {
    target on
    refraction on
    reflection on
    collect on
  }
}
#end

//  CCC Y Y PP
//  C   Y Y P P
//  C    Y  PP
//  C    Y  P
//  CCC  Y  P

#local a=0;
#while(a<11.0001)
  light_source { <4*sin(a*pi*2/11), 5*cos(a*pi*6/11), -4*cos(a*pi*2/11)> colour (1+<sin(a*pi*2/11),sin(a*pi*2/11+pi*2/3),sin(a*pi*2/11+pi*4/3)>)*2/11 }
  #local a=a+1;
#end

background { color <1,1,1> }

camera {
  perspective
  location <0,0,0>
  direction <0,0,1>
  right x/2
  up y/2
  sky <0,1,0>
  location <0,0,-4.8>
  look_at <0,0,0>
}

global_settings {
  max_trace_level 40
  photons {
    count 200000
    autostop 0
  }
}

Dostupna je vektorska inačica (SVG) ove slike. Trebala bi se koristiti umjesto ove rasterske slike.

File:Hexahedron.jpg → File:Hexahedron.svg

Za više informacija o vektorskoj grafici, pročitajte o prelasku Zajedničkog poslužitelja na SVG.
Također pročitajte informacije o podršci MediaWiki softvera slikama u SVG formatu.

Na drugim jezicima

Alemannisch ∙ Bahasa Indonesia ∙ Bahasa Melayu ∙ British English ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ eesti ∙ English ∙ español ∙ Esperanto ∙ euskara ∙ français ∙ Frysk ∙ galego ∙ hrvatski ∙ Ido ∙ italiano ∙ lietuvių ∙ magyar ∙ Nederlands ∙ norsk bokmål ∙ norsk nynorsk ∙ occitan ∙ Plattdüütsch ∙ polski ∙ português ∙ português do Brasil ∙ română ∙ Scots ∙ sicilianu ∙ slovenčina ∙ slovenščina ∙ suomi ∙ svenska ∙ Tiếng Việt ∙ Türkçe ∙ vèneto ∙ Ελληνικά ∙ беларуская (тарашкевіца) ∙ български ∙ македонски ∙ нохчийн ∙ русский ∙ српски / srpski ∙ татарча/tatarça ∙ українська ∙ ქართული ∙ հայերեն ∙ বাংলা ∙ தமிழ் ∙ മലയാളം ∙ ไทย ∙ 한국어 ∙ 日本語 ∙ 简体中文 ∙ 繁體中文 ∙ עברית ∙ العربية ∙ فارسی ∙ +/−

Historija datoteke

Kliknite na datum/vrijeme da biste vidjeli tadašnju verziju datoteke.

	Datum/vrijeme	Minijatura	Dimenzije	Korisnik	Komentar
aktualna	22:28, 6 januar 2005		742 × 826 (51 kB)	Kjell André	A Hexahedron (cube). A regular polyhedron.

Upotreba datoteke

Sljedećih 3 stranica koriste ovu datoteku:

Globalna upotreba datoteke

Ovu datoteku upotrebljavaju i sljedeći projekti:

Upotreba na projektu ar.wikipedia.org
- سداسي سطوح
Upotreba na projektu ary.wikipedia.org
- مكعب
Upotreba na projektu az.wikipedia.org
- Kub
- Düzgün çoxüzlülər
Upotreba na projektu bg.wikipedia.org
- Уикипедия:Файлове
- Платоново тяло
Upotreba na projektu ca.wikipedia.org
- Políedre
Upotreba na projektu cs.wikipedia.org
- Platónské těleso
- Mnohostěn
- Wikipedista:Jan Hložanka
Upotreba na projektu da.wikipedia.org
- Terning
- Platonisk legeme
- Polyeder
Upotreba na projektu de.wikipedia.org
- Benutzer:Raphneck
- Wikipedia:Löschkandidaten/17. Juli 2008
Upotreba na projektu en.wikipedia.org
- Cube
- User:Cyp
- Regular polyhedron
- User:Fropuff/Tables/Platonic solids
- User:Mike40033/List of regular polytopes
- User:Cyp/Poly.pov
Upotreba na projektu en.wikibooks.org
- Supplementary mathematics/Area and volume
- Supplementary mathematics/Printable version
Upotreba na projektu en.wikiversity.org
- Distances/Vectors
Upotreba na projektu eo.wikipedia.org
- Listo de regulaj hiperpluredroj
- Alternado (geometrio)
- Platona solido
- Kvazaŭregula romba kahelaro
- Okedra simetrio
- Regula pluredro
- Triangula kajtopluredro
Upotreba na projektu es.wikipedia.org
- Usuario:Maestro Cúbico
- Esfericidad
- Alternación (geometría)
Upotreba na projektu eu.wikipedia.org
- Ertz (geometria)
- Poliedro dual
- Trapezoedro triangeluar
Upotreba na projektu fr.wikipedia.org
- Théorème de Descartes-Euler
Upotreba na projektu fr.wiktionary.org
- sesedro
Upotreba na projektu gl.wikipedia.org
- Sólido platónico
Upotreba na projektu he.wikipedia.org
- פורטל:מתמטיקה
- קובייה
- פורטל:מתמטיקה/הידעת?/קטעי הידעת
- פורטל:מתמטיקה/הידעת?/9
- פורטל:יוון העתיקה/הידעת?/קטעי הידעת
- פורטל:יוון העתיקה/הידעת?/2
Upotreba na projektu he.wikibooks.org
- מה זה אומר בעצם?/קפלר והכוכבים
- מתמטיקה תיכונית/הנדסת המרחב/מנסרה
Upotreba na projektu he.wiktionary.org
- קביה
- עשרימון

Potpunija globalna upotreba datoteke

Datoteka:Hexahedron.jpg

Opis izmjene

Licenciranje

Povray src code

Opisi

Predmeti pokazani na ovoj datoteci

prikazuje

status autorskog prava ^Bosanski

zaštićeno autorskim pravima ^Bosanski

licenca ^Bosanski

GNU-ova licenca za slobodnu dokumentaciju, verzija 1.2 ili novija ^{Serbian (Latin script)}

Creative Commons Autorstvo-Deliti pod istim uslovima 3.0 nelokalizovana ^{Srpski (transliteracija)}

Historija datoteke

Upotreba datoteke

Globalna upotreba datoteke

Datoteka:Hexahedron.jpg

Opis izmjene

Licenciranje

Povray src code

Opisi

Predmeti pokazani na ovoj datoteci

prikazuje

status autorskog prava Bosanski

zaštićeno autorskim pravima Bosanski

licenca Bosanski

GNU-ova licenca za slobodnu dokumentaciju, verzija 1.2 ili novija Serbian (Latin script)

Creative Commons Autorstvo-Deliti pod istim uslovima 3.0 nelokalizovana Srpski (transliteracija)

Historija datoteke

Upotreba datoteke

Globalna upotreba datoteke

status autorskog prava ^Bosanski

zaštićeno autorskim pravima ^Bosanski

licenca ^Bosanski

GNU-ova licenca za slobodnu dokumentaciju, verzija 1.2 ili novija ^{Serbian (Latin script)}

Creative Commons Autorstvo-Deliti pod istim uslovima 3.0 nelokalizovana ^{Srpski (transliteracija)}